Changes: Soyuz class

Revision as of 20:37, 10 December 2013

The Soyuz-class was a type of Federation starship that was in service with Starfleet during the late 23rd century. The class was retired by the late-2280s. (TNG: "Cause and Effect")

External design

The class design was based on the single hull configuration that was employed by the Miranda-class. Mounted on the underside of the primary hull were two nacelle pylons connected to the warp nacelles. The aft section featured an enlarged tail section that protruded out behind the ship, surrounded on either side by its dual shuttlebays. Above either nacelle were mounted outboard sensor pods. (TNG: "Cause and Effect")

Internal design

Main bridge

The Soyuz-class bridge shared a similar floor plan with contemporary Federation starships of its era.

Located in the front was the ship's viewscreen, with the captain's chair located near the center of the bridge. A stand-up console is located on the rear starboard side between the captain and the railing that separates the center of the bridge from the rear wall, which has various systems stations located along it. (TNG: "Cause and Effect")

The bridge of the Bozeman was a redress of the USS Enterprise-D battle bridge, which was, in turn, a redress of the refit USS Enterprise bridge. One unique detail of this redress is the inclusion of the specially created MSDs designed especially for this class.

Ships commissioned

USS Bozeman (NCC-1941)

Appendices

Appearances

TNG: "Cause and Effect"

Background

According to the script, the design for the Soyuz-class was simply described as "clearly an older style starship."

It is noted in several reference books, including the Star Trek Encyclopedia, the Star Trek: The Next Generation Companion, and the Star Trek: The Next Generation - The Continuing Mission, that it was originally hoped that a new design could be developed for the Soyuz-class Bozeman, whereas, it was also suggested to make the ship a 1960s-era, pre-movie Constitution-class vessel. Unfortunately, budget demands put an end to that when the costs of creating and filming ships, props and costumes began to add up.

As a result, the art department was asked to modify the already existing USS Reliant miniature from Star Trek II: The Wrath of Khan, minus the roll bar and with new sensor turrets, docking port and bridge. A preliminary idea for this "new" Soyuz design, was a modification of the Reliant, dated 14 February 1992, drawn by Mike Okuda on an image of the Miranda-class USS Courageous (NCC-1861), photocopied from the fan publication, Ships of the Star Fleet, Volume One. The final modifications were made by Okuda and Greg Jein.

According to the Encyclopedia, "the class was named for the Russian spacecraft that shuttled cosmonauts up to the Salyut space station." The name "Soyuz" (Союз) means "union" in the Russian language.

For further information on the studio model, see: Miranda-class studio model

External link

Template:NCwiki

@@ Line 1: / Line 1: @@
+{{DISPLAYTITLE:''Soyuz'' class}}
-[[Image:USS Bozeman emerges from a temporal causality loop.jpg|thumb|Forward view]]
+{{Sidebar starship class|
-[[Image:Soyuz class.jpg|thumb|Aft view]]
+|Name=        	''Soyuz''-class
+|image=       	USS Bozeman emerges from a temporal causality loop.jpg
+|imagecap=    	Forward view
+|owner=         {{Federation}}
+|operator=      [[Starfleet]]
+|Active=	[[23rd century]]
+|image2=	USS Bozeman, aft.jpg
+|imagecap2=	Aft view
+}}
+The '''''Soyuz''-class''' was a type of [[Federation]] [[starship]] that was in service with [[Starfleet]] during the late [[23rd century]]. The class was retired by the late-[[2280s]]. ({{TNG|Cause and Effect}})
+==External design ==
-The '''''Soyuz''-class''' was a type of [[Federation]] [[starship]] that was in service with [[Starfleet]] during the late [[23rd century]]. The class was retired by the mid-[[2280s]]. ({{TNG|Cause and Effect}})
+The class design was based on the [[primary hull|single hull]] configuration that was employed by the {{Class|Miranda}}. Mounted on the underside of the primary hull were two [[nacelle pylon]]s connected to the [[warp nacelle]]s. The [[aft]] section featured an enlarged tail section that protruded out behind the ship, surrounded on either side by its dual [[shuttlebay]]s. Above either nacelle were mounted outboard [[sensor pod]]s. ({{TNG|Cause and Effect}})
+==Internal design==
-==External Design ==
+===Main bridge===
-The class design was based on the [[Miranda class|''Miranda''-class]] already in operation, and featured an enlarged aft [[cargo bay|cargo]] and [[shuttlebay]] section, as well as several large outboard [[sensor pod]]s. ({{TNG|Cause and Effect}})
+[[File:Soyuz bridge.jpg|thumb|Main bridge]]
+The ''Soyuz''-class [[bridge]] shared a similar floor plan with contemporary Federation starships of its era.
-==Interior Design==
-===Main Bridge===
-[[Image:Soyuz bridge.jpg|thumb|Main bridge]]
-The ''Soyuz''-class [[bridge]] shared a similar floor plans shared among contemporary Federation starships of its era.
 Located in the front was the ship's [[viewscreen]], with the [[captain's chair]] located near the center of the bridge. A stand-up console is located on the rear [[starboard]] side between the captain and the railing that separates the center of the bridge from the rear wall, which has various systems stations located along it. ({{TNG|Cause and Effect}})
-:''The bridge of the ''Bozeman'' was a redress of the [[USS Enterprise (NCC-1701-D)|''Enterprise''-D]] [[battle bridge]], which was, in turn, a redress of the refit [[USS Enterprise (NCC-1701)|''Enterprise'']] bridge. One unique detail of this redress is the inclusion of the specially created [[MSD]]s designed especially for this class.''
+{{bginfo|The bridge of the ''Bozeman'' was a redress of the {{USS|Enterprise|NCC-1701-D|-D}} [[battle bridge]], which was, in turn, a redress of the refit {{USS|Enterprise|NCC-1701}} bridge. One unique detail of this redress is the inclusion of the specially created [[MSD]]s designed especially for this class.}}
-==Ships of the Class==
+==Ships commissioned==
-*[[USS Bozeman|USS ''Bozeman'']] (NCC-1941)
+*{{USS|Bozeman}} (NCC-1941)
 ==Appendices==
@@ Line 26: / Line 34: @@
 According to the script, the design for the ''Soyuz''-class was simply described as "clearly an older style starship."
-According to the ''[[Star Trek Encyclopedia]]'', "''it was originally hoped that a new design could be developed for the ''Soyuz''-class USS ''Bozeman'', but practical considerations dictated the reworking of the existing [[USS Reliant|USS ''Reliant'']] [[studio model|model]] originally built for ''[[Star Trek II]]."
+It is noted in several [[reference book]]s, including the ''[[Star Trek Encyclopedia]]'', the ''[[Star Trek: The Next Generation Companion]]'', and the ''[[Star Trek: The Next Generation - The Continuing Mission]]'', that it was originally hoped that a new design could be developed for the ''Soyuz''-class ''Bozeman'', whereas, it was also suggested to make the ship a [[TOS|1960s-era]], pre-movie {{Class|Constitution}} vessel. Unfortunately, budget demands put an end to that when the costs of creating and filming ships, props and costumes began to add up.
+As a result, the art department was asked to modify the already existing {{USS|Reliant}} [[studio model|miniature]] from {{film|2}}, minus the roll bar and with new sensor turrets, docking port and bridge. A preliminary idea for this "new" ''Soyuz'' design, was a modification of the ''Reliant'', dated {{d|14|February|1992}}, drawn by [[Mike Okuda]] on an image of the ''Miranda''-class USS ''Courageous'' (NCC-1861), photocopied from the [[fan fiction|fan publication]], ''Ships of the Star Fleet, Volume One''. The final modifications were made by Okuda and [[Greg Jein]].
-This was further clarified in the [[reference book]] ''[[Star Trek: The Next Generation - The Continuing Mission]]'' that "''the ship that crashes into the [[USS Enterprise (NCC-1701-D)|''Enterprise'']] was supposed to be a [[Constitution class|''Constitution''-class]] vessel, just like the original ''[[USS Enterprise (NCC-1701)|Enterprise]]''. Unfortunately, the cost of building an all-original model for the episode was prohibitive, so the art department was once again asked to modify an already existing model— the ever-reliable ''[[USS Reliant|Reliant]]."
+According to the ''Encyclopedia'', "''the class was named for the [[Soyuz|Russian spacecraft]] that shuttled cosmonauts up to the ''{{w|Salyut}}'' space station.''" The name "Soyuz" (Союз) means "union" in the Russian language.
-A preliminary idea for the ''Soyuz'' modification of the ''Reliant'', dated {{d|14|February|1992}}, was drawn by [[Mike Okuda]] on an image of the ''Miranda''-class USS ''Courageous'' (NCC-1861), photocopied from the [[fan publications|fan publication]], ''Ships of the Star Fleet, Volume One''. The final modifications were made Okuda and [[Greg Jein]].
+For further information on the [[studio model]], see: [[Miranda class model#Large studio model|''Miranda''-class studio model]]
-The ''Encyclopedia'' further stated that "''the class was named for the {{w|Soyuz spacecraft|Russian spacecraft}} that shuttled cosmonauts up to the ''{{w|Salyut}}'' space station.''" The name "Soyuz" (or "Soyus" to be more exact) further means "union" in the [[Russian language]].
+===External link===
+* {{NCwiki|Soyuz class|''Soyuz'' class}}
-==External Link==
-* {{NCwiki}}
 [[Category:Federation starship classes]]
 [[de:Soyuz-Klasse]]
-[[nl:USS Soyuz]]
+[[fr:Classe Soyuz]]
+[[ja:ソユーズ級]]
+[[sv:Soyuzklass]]