Changes: Romulan shuttle

Revision as of 20:24, 6 June 2014

The Romulan shuttlecraft was used by the Romulan Star Empire in the 2370s. They are approximately the same size as a Danube-class runabout. Romulan shuttles are also fitted with a cloaking device.

Romulan Senator Vreenak traveled to a secret meeting with Benjamin Sisko on Deep Space 9 aboard such a shuttle in 2374. (DS9: "In the Pale Moonlight")

Appendices

Background information

According to a comparison chart drawn up by Gary Hutzel and Larry Nemecek, the length of the Romulan shuttle was 80 feet, which coincides with the length given in the Technical Manual as stated below. [1]

Studio model

The Romulan shuttle was designed by Doug Drexler at the behest of Gary Hutzel, who, as Drexler recalled, put his request as follows, "It's a brief, almost throwaway shot of the shuttle landing at DS9′s mid ring, and riding the elevator down into the station's hangars. We'll need a design for the shuttle, plus the hangar interior… can a guy like you, do a thing like this, for someone like me?" [2]^(X) The studio model miniature, which only made one appearance in the entire franchise, was built by Tony Meininger at Brazil-Fabrication & Design. According to Drexler, the pod-like modules appearing in the midsection of the main body, between the nacelle struts, are the passenger compartments. [3]^(X)

The model was filmed for its only appearance at Image G, where it was handled by among others Dennis Hoerter. [4] No motion control photography was utilized on the model, as no in-flight shots were required. [5]^(X) Instead, stationary shots were taken of the model inside the maquette of Deep Space 9's shuttlebay, specifically constructed for the episode. [6]^(X) Nevertheless, the shot did require some work in post-production compositing as Drexler explained, "It did require compositing. Gary shot every element as it's own layer… engine lights, cockpit lights, hangar bay lights… everything. That way, when you get into comp, you can adjust any element you want. I'm nearly certain it's 35mm. The smaller camera would make it easier to get in close." [7]^(X) The Romulan shuttle was the last full-fledged physical studio model ever built for a Star Trek television production, as CGI modeling was used exclusively afterwards. The reason why a physical studio model was built in this late stage when CGI was already commonplace stemmed from Hutzel's preference to use traditional visual effects techniques over CGI. [8]^(X)

Technical Manual

The following information of specifications and defenses comes exclusively from the Star Trek: Deep Space Nine Technical Manual:

Production Base: Unknown; Romulan Star Empire
Type: Long-range warp shuttle
Accommodation: Fifteen plus officers, crew, and troops (est.)
Power Plant: One artificial singularity-drive warp core feeding two nacelles; one impulse system
Dimensions: Length, 24.23 meters; beam, 15.98 meters; height, 6.57 meters
Mass: 142.31 metric tonnes (est.)
Performance: Warp 9.6 (observed)
Armament: Six ship-mounted disruptors; two photon torpedo launchers

Apocrypha

In Star Trek: Armada II, the Romulan shuttle model was reused as the Kestrel-class; however, as an assault vessel carrying 500 Romulan troops, it would have to be significantly larger than the shuttle featured in the show. Star Trek Online also identifies it as the Kestrel-class, designated as a runabout.

@@ Line 1: / Line 1: @@
+{{Sidebar starship class|
-[[Image:Romulan_Shuttle_on_DS9.jpg|thumb|A Romulan shuttle in a [[landing pad]] on DS9.]]
+|Name      = Romulan shuttle
-The '''Romulan shuttle''' was used by the [[Romulan Star Empire]] in the [[2370]]s. They are approximately the same size as a [[Danube class|''Danube''-class]] [[runabout]]. Romulan shuttles are also fitted with a [[cloaking device]].
+|image     = Romulan shuttle.jpg
+|imagecap  = Vessel of the class, at [[Deep Space 9]]
+|owner     = [[Romulan Star Empire]]
+|operator  = [[Romulan military]]
+|Type      = [[Shuttle]]
+|Active    = [[2370]]s
+|Defenses  = [[Cloaking device]]
+|image2    = Romulan shuttle on DS9 small.jpg
+|imagecap2 = Starboard quarter view
+}}
+The '''Romulan shuttlecraft''' was used by the [[Romulan Star Empire]] in the [[2370]]s. They are approximately the same size as a {{class|Danube}} [[runabout]]. Romulan shuttles are also fitted with a [[cloaking device]].
-[[Romulan]] [[Romulan Senate|Senator]] [[Vreenak]] travelled to a secret meeting with [[Benjamin Sisko]] on [[Deep Space 9]] aboard such a [[shuttle]] in [[2374]]. ([[DS9]]: "[[In the Pale Moonlight]]")
+[[Romulan]] [[Romulan Senate|Senator]] [[Vreenak]] traveled to a secret meeting with [[Benjamin Sisko]] on [[Deep Space 9]] aboard such a [[shuttle]] in [[2374]]. ({{DS9|In the Pale Moonlight}})
-==Background==
+== Appendices ==
+=== Background information ===
-===Model===
+According to a comparison chart drawn up by [[Gary Hutzel]] and [[Larry Nemecek]], the length of the Romulan shuttle was 80 feet, which coincides with the length given in the ''Technical Manual'' as stated below. [http://larrynemecek.blogspot.com/search/label/VFX]
-The Romulan shuttle was designed by [[Doug Drexler]] and the [[studio model]] miniature was built by [[Tony Meininger]]. This model only made one appearance in the entire franchise.
-===Technical Manual===
+==== Studio model ====
+[[File:Romulan shuttle studio model detailed by Gary Hutzel.jpg|thumb|left|Hutzel putting on the finishing touches on the model]]
-The following information of specifications and defenses comes exclusively from the ''[[Star Trek: Deep Space Nine Technical Manual]]'':
+The Romulan shuttle was designed by [[Doug Drexler]] at the behest of [[Gary Hutzel]], who, as Drexler recalled, put his request as follows, "''It's a brief, almost throwaway shot of the shuttle landing at [[Deep Space 9|DS9]]′s mid ring, and riding the elevator down into the station's [[shuttlebay|hangar]]s. We'll need a design for the shuttle, plus the hangar interior… can a guy like you, do a thing like this, for someone like me?''" {{DrexFiles|2008/12/24/romulan-shuttle/}} The [[studio model]] miniature, which only made one appearance in the entire franchise, was built by [[Tony Meininger]] at [[Brazil-Fabrication & Design]]. According to Drexler, the pod-like modules appearing in the midsection of the main body, between the nacelle struts, are the passenger compartments. {{DrexFiles|2009/03/26/romulan-shuttle-first-sketch/}}
+The model was filmed for its only appearance at [[Image G]], where it was handled by among others [[Dennis Hoerter]]. [http://www.flickr.com/photos/22597000@N07/3530732837/in/photostream] No {{w|motion control photography}} was utilized on the model, as no in-flight shots were required. {{DrexFiles|2009/01/30/new-romulan-shuttle-shots-uncovered/#comment-780}} Instead, stationary shots were taken of the model inside the [[Studio_model#Maquette|maquette]] of Deep Space 9's shuttlebay, specifically constructed for the episode. {{DrexFiles|2009/01/30/new-romulan-shuttle-shots-uncovered/}} Nevertheless, the shot did require some work in post-production compositing as Drexler explained, "''It did require compositing. Gary shot every element as it's own layer… engine lights, cockpit lights, hangar bay lights… everything. That way, when you get into comp, you can adjust any element you want. I'm nearly certain it's 35mm. The smaller camera would make it easier to get in close.''" {{DrexFiles|2009/01/30/new-romulan-shuttle-shots-uncovered/#comment-784}} The Romulan shuttle was the last full-fledged physical studio model ever built for a ''Star Trek'' television production, as [[CGI]] modeling was used exclusively afterwards. The reason why a physical studio model was built in this late stage when CGI was already commonplace stemmed from Hutzel's preference to use traditional visual effects techniques over CGI. {{DrexFiles|2009/01/30/new-romulan-shuttle-shots-uncovered/#comment-780}}
-* Production Base: Unknown; Romulan Star Empire
-* Accommodation: 15 plus officers, crew, and troops (est.)
+==== ''Technical Manual'' ====
-* Power Plant: One artifical singularity-drive warp core feeding two nacelles; one impulse system
+The following information of specifications and defenses comes exclusively from the ''[[Star Trek: Deep Space Nine Technical Manual]]'':
-* Dimensions:
-** Length: 24.23 meters
-** Beam: 15.98 meters
-** Height: 6.57 meters
-* Mass: [[metric ton|142.31 metric tons]] (est.)
+* '''Production Base:''' Unknown; Romulan Star Empire
-Finally, while the Technical Manual itself is not [[canon]], it is a Memory Alpha [[Memory Alpha:Canon policy|permitted resource]].
+* '''Type:''' Long-range warp shuttle
+* '''Accommodation:''' Fifteen plus officers, crew, and troops (est.)
+* '''Power Plant:''' One artificial singularity-drive warp core feeding two nacelles; one impulse system
+* '''Dimensions:''' Length, 24.23 meters; beam, 15.98 meters; height, 6.57 meters
+* '''Mass:''' 142.31 metric tonnes (est.)
+* '''Performance:''' Warp 9.6 (observed)
+* '''Armament:''' Six ship-mounted disruptors; two photon torpedo launchers
-==Aprocrypha==
+=== Apocrypha ===
-In [[Star Trek: Armada II]], the Romulan shuttle was named as being of the ''Kestrel'' class.
+In ''[[Star Trek: Armada II]]'', the Romulan shuttle model was reused as the ''Kestrel''-class; however, as an assault vessel carrying 500 Romulan troops, it would have to be significantly larger than the shuttle featured in the show. ''[[Star Trek Online]]'' also identifies it as the ''Kestrel''-class, designated as a [[runabout]].
 [[Category:Romulan starship classes|Shuttle]]
+[[Category:Shuttle classes]]
 [[de:Romulanisches Shuttle]]
+[[pl:Romulański prom]]