Changes: Miranda class

Revision as of 05:48, 16 February 2014

The Miranda-class starship was a type of starship introduced by Starfleet in the late 23rd century and remained in use through the late 24th century.

History

Miranda-class starships were in service as early as the mid-2280s. (Star Trek II: The Wrath of Khan; Star Trek IV: The Voyage Home)

Some Miranda-class starships constructed during the first half of the 24th century fell under the authority of the Yoyodyne Division, around stardate 22519.5. Vessels including USS Brattain were constructed at this time at 40 Eridani A Starfleet Construction Yards. (TNG: "Night Terrors" dedication plaque)

The mission profile of the Miranda-class varied from performing various scientific roles to conducting patrol duties. (Star Trek II: The Wrath of Khan; TNG: "Night Terrors"; Star Trek IV: The Voyage Home; DS9: "In the Cards")

By the latter half of the 24th century, one variation of this class, USS Lantree, was known by the designation of Class 6 Federation supply ship. (TNG: "Unnatural Selection")

The Miranda-class was present in several major Federation engagements against the Borg, including the Battle of Wolf 359 and the Battle of Sector 001. (DS9: "Emissary"; Star Trek: First Contact)

They were also present in numerous Dominion War battles, where they often served as escorts. Many ships of the class saw action during Operation Return, the First and Second Battles of Chin'toka, and the Battle of Cardassia. Many Miranda-class vessels were stationed near Deep Space 9. (DS9: "Sacrifice of Angels", "Tears of the Prophets", "The Changing Face of Evil", "What You Leave Behind", etc.)

Miranda-class starship were also shown as models on several occasions such as in Deep Space 9's classroom. (DS9: "The Nagus")

Technical data

Physical arrangement

USS Brattain MSD — The master systems display schematics

The configuration of the Miranda-class shared a similar design lineage and features with the refit Constitution-class implemented in the early 2270s. (Star Trek: The Motion Picture) The design also closely resembled the Soyuz-class starships that were also in service around the same time. (TNG: "Cause and Effect")

The Miranda-class was composed of a single primary hull, consisting of a saucer that was similar to that of the Constitution-class; however, the bridge module, positioned on top in the center, was shaped differently than the Constitution-class module.

Mounted on the underside of the primary hull were two nacelle pylons connected to the warp nacelles. (Star Trek II: The Wrath of Khan, etc.)

Although the nacelles were visually identical to the nacelles used on Constitution-class, the tops of the nacelles were mounted to the pylons. On the Constitution-class, the pylons were mounted to the bottom of the nacelles.

Design features of the primary hull included a docking port located on the forward section of the ship; the aft section included two shuttlebays, separated by the vessel's impulse engines. These shuttlebays were visually numbered; "1" being on the rear-port side, and "2" on the rear-starboard side. (Star Trek II: The Wrath of Khan; DS9: "The Way of the Warrior", etc.)

Configurations

There were five different known hull configurations utilized with the Miranda-class during its time in service.

The predominant Miranda-class design included a superstructure (or "roll bar") immediately above the primary hull, as a dorsal extension of the ventral nacelle pylons. This superstructure was equipped with torpedo launchers and phaser banks. (Star Trek II: The Wrath of Khan, etc.) Some configurations lacked the "roll bar" superstructure, and in other cases, included two large sensor pods affixed on the port and starboard sides of the primary hull. In other configurations there was a single pod module. (TNG: "Unnatural Selection"; DS9: "Emissary", "Favor the Bold")

By late 2373, Miranda-class ships using the predominant design had undergone upgrades to their warp nacelles and in some cases to impulse engine systems. (DS9: "Sacrifice of Angels")

The new post-2373 Miranda-class ships came as a result of the transition from studio model to CGI models. The new design featured glowing nacelles in some cases as well as made the semi-circle at the front of the nacelle yellow. In addition, some of the CGI ships included an additional red impulse engine glow where the rear torpedo launcher had normally been located.

Tactical systems

Standard to all designs were six dual phaser banks located on the primary hull – three mounted to the top and three mounted on the bottom of the saucer. Also standard to all designs were two single phaser emitters mounted just beneath the impulse engines.

In those ships possessing the "roll bar," that superstructure contained two tubular phaser emitters on each side that could fire both forward and to the ship's flanks. There were also two forward and two aft photon torpedo launchers housed in a pod mounted in the center of the superstructure. (Star Trek II: The Wrath of Khan, Star Trek: First Contact)

While the two aft-phasers were never seen used in any film or episode, they are visible on the model. [1] The configuration of the torpedo launcher cowling was somewhat similar in appearance to the cowling used for the torpedo launchers on Constitution-class vessels.

By the 24th century a number of modifications were made to the Miranda-class weapons systems. Some Miranda-class vessels, such as those of the "twin-pod" variant, included a phaser array mounted on the lower part of the ventral dome and photon torpedo launchers in the main part of the ship rather than in a pod on the "roll-bar". (DS9: "Emissary")

In "Emissary", the Captain of the Saratoga gave an order to "load torpedo bays" (which is also mentioned visually in the script), though the ship was never seen firing any torpedoes at all.

The class 6 variant of this class featured class 3 defensive armaments. (TNG: "Unnatural Selection")

A majority of 24th century Miranda-class vessels of the "roll-bar" variant, particularly during the Dominion War, were equipped with phaser arrays and photon torpedoes equivalent to those used on other ships of the era, while keeping the same weapon array placements as the 23rd century Miranda. (DS9: "Sacrifice of Angels", "What You Leave Behind", VOY: "Endgame", etc.)

Interior design

Main bridge

The design of Miranda-class bridge during the 23rd century shared a similar layout to contemporary vessels of that era.

Located on Deck 1 of the saucer section, the Main Bridge housed the command center of the Miranda-class. The design lineage of the main bridge was a fairly standard floor plan for a Federation starship. Against the forward bulkhead was placed the ship's viewscreen, with side-by-side navigation and helm consoles. The captain's chair was directly aft of the aforementioned stations. Several variations exist in the layout of the surrounding stations.

At the rear and center of the USS Reliant's bridge was the turbolift entryway. The primary stations, which were located along the rear of the bridge, included the tactical station on the port side of the bridge. Along the rear starboard side of the bridge were the primary science station and communications station. (Star Trek II: The Wrath of Khan) The bridge similarly found on board the USS Saratoga (NCC-1887) also had primary stations located along the perimeter of the bridge; however, the Saratoga's bridge included the science station on the port side of the bridge, nearly parallel to the navigation station. (Star Trek IV: The Voyage Home)

The bridge of the Reliant was a redress of the USS Enterprise bridge, with different colors and a rearrangement of consoles. Because of this, some of the displays mistakenly had diagrams of a Constitution-class on them. The bridge of the Saratoga was essentially a reuse of the design created for the bridge of the USS Grissom.

By the 24th century, further reconfigurations were made to the layout of the bridge, including the separation of the navigation and helm station, which was replaced by the conn station (on the starboard side) and ops station (on the port side).

The bridge of the USS Lantree was relatively simplistic in design, containing little more than a large LCARS interface and star charts on the back of the bridge. (TNG: "Unnatural Selection") The bridge of the USS Saratoga (NCC-31911) had a much more complex layout, including two additional standing consoles located behind the conn and ops, parallel and slightly behind the captain's chair. The standing console on the port side of the ship contained the tactical station. Also located on the port side, in the foremost section of the bridge, was a turbolift. Along the aft of the bridge were several various access stations. (DS9: "Emissary")

Relatively similar to the bridge of the Saratoga, the bridge of the USS Brattain had large support braces surrounding the captain's chair to the sides and rear. In place of the two standing consoles of the Saratoga was a single engineering station, placed directly behind the captain's chair and directly in front of an engineering MSD interface. (TNG: "Night Terrors")

The bridge of the Lantree was a redress of the USS Enterprise-D's battle bridge, which was additionally rotated 180 degrees. As a result, the battle bridge viewscreen appeared at the rear of the bridge. The viewscreen was then covered to make it appear as a panel instead.

Corridors

The numerous corridors that connected the various sections of the Miranda-class resembled those of contemporary designs. The corridors on board the USS Reliant resembled those of the refit Constitution-class. (Star Trek II: The Wrath of Khan) The outer corridors on board the USS Saratoga (NCC-31911) were heavily fortified with a system of support braces. (DS9: "Emissary")

The brief shot of the Reliant's corridor was simply the use of the existing sets designed for the USS Enterprise.

Main engineering

Main engineering, USS Reliant

Main engineering contained a vertical warp core, with multiple levels surrounding the core. (Star Trek II: The Wrath of Khan)

The brief shot of the Reliant's main engineering was simply the use of the existing sets designed for the USS Enterprise.

Transporter room

USS Reliant transporter — Transporter room, USS *Reliant*

The staging area of the transporter room on board the Miranda-class possessed six transporter pads. Transporter control could be accessed through a console located on the bridge. (Star Trek II: The Wrath of Khan)

The brief shot of the Reliant's transporter room was simply the use of the existing sets designed for the USS Enterprise.

Shuttlebay

The Miranda-class features two shuttlebays, located port and starboard of the ship's center. On some Miranda-class ships, such as the USS Saratoga, both of the shuttlebays hold escape pods capable of transporting several personnel. (DS9: "Emissary")

Crew quarters

USS Saratoga quarters — Crew quarters, USS *Saratoga* (NCC-31911)

The crew quarters located on the outer rim of the ship contained several large picture windows, littered with numerous large support braces. (DS9: "Emissary")

Ships commissioned

Named

USS Antares (NCC-9844)
USS Brattain (NCC-21166)
USS Lantree (NCC-1837)
USS Majestic (NCC-31060)
USS Nautilus (NCC-31910)
USS Reliant (NCC-1864)
USS Saratoga (NCC-1887)
USS Saratoga (NCC-31911)
USS ShirKahr (NCC-31905)
USS Sitak
USS Tian An Men (NCC-21832)
USS Trial (NCC-1948)

Unnamed

Unnamed Miranda-class starships

Appendices

Appearances

Star Trek films:
TNG:
- "Unnatural Selection"
- "Night Terrors"
- "Unification I"
DS9:
- "Emissary"
- "The Nagus" (model)
- "Battle Lines" (model)
- "Dramatis Personae" (model)
- "Duet" (model)
- "The Way of the Warrior"
- "By Inferno's Light"
- "Call to Arms"
- "A Time to Stand"
- "Sons and Daughters"
- "Behind the Lines"
- "Favor the Bold"
- "Sacrifice of Angels"
- "You Are Cordially Invited"
- "The Magnificent Ferengi"
- "The Reckoning"
- "Tears of the Prophets"
- "Afterimage"
- "Treachery, Faith and the Great River"
- "Strange Bedfellows"
- "The Changing Face of Evil"
- "Tacking Into the Wind"
- "What You Leave Behind"
VOY: "Endgame"

Background information

Name

The name Miranda-class was not mentioned in dialog on-screen, but was devised by the art department of TNG to refer to this design. The name was used on several pieces of on-screen signage referring to these vessels, and is also used by dedicated references such as the Star Trek Encyclopedia.

According to the Encyclopedia, the class was "named for Prospero's daughter, a character in William Shakespeare's last play, The Tempest."

According to an early final draft of the script for "Unnatural Selection" the USS Lantree was identified as a "class R Starfleet supply ship" rather than a "class 6 Federation supply ship". [2]

Specifications

The specifications for the Miranda were not mentioned in dialog, but are referenced from the show's art department. The initial length for the Miranda-class of 765' (233m) was established during the production of Star Trek II, that was later followed up by Andrew Probert during TNG Season 1. The exact length, based on the universally accepted length of the refit Constitution-class, at least behind-the-scenes, at 1000 feet and assuming that both classes employ standardized ship components like nacelles and saucers-sections, is 234.9 m (770.67ft). The scale of the CGI mesh was scaled approximately twenty-five percent smaller than had been previously established. According to a 20 January 1998 post in the newsgroup alt.tv.star-trek.ds9 by David Stipes, a length of approximately 500' to 560' (167m to 187m) was used when he blocked shots in DS9. [3]

Studio model

See Miranda-class model.

Technical Manual

The following information of specifications and defenses comes exclusively from the Star Trek: Deep Space Nine Technical Manual:

Production Base: ASDB Integration Facility, Starbase 134 Integration Facility, Rigel VI.
Type: Medium Cruiser.
Accommodation: 220 officers and crew; 500 personal evacuation limit.
Power Plant: One 1500 plus Cochrane warp core feeding two nacelles; one impulse system.
Dimensions: Length, 277.76 meters; beam, 173.98 meters; height: 65.23 meters.
Mass: 655,000 metric tons.
Performance: Warp 9.2 for 12 hours.
Armament: Six type-7 phaser emitters; two pulse phaser cannons; two photon torpedo launchers.

Apocrypha

In the comic book Who Killed Captain Kirk? and in the materials published by FASA for use with their Star Trek: The Role Playing Game and Starship Tactical Combat Simulator this ship is referred to as the Reliant-class. FASA describes it as a refit of the Anton-class, which had a similar design that featured TOS-styled warp nacelles.

Apocryphal appearances

The Interplay PC Game Starfleet Academy features several Miranda-class vessels including USS Oberon (NCC-1806), USS Rutherford (NCC-1835), USS Alexandria (NCC-1842), USS Tempest (NCC-1852), USS Atlantis (NCC-1865), and USS Demeter (NCC-1868).
The Interplay PC Game New Worlds features the Miranda-class vessel USS Ranger (NCC-1975).
The Activision PC Game The Fallen features the Miranda-class vessel USS Ulysses (NCC-10767). Several levels feature Sisko and Worf exploring the wreckage of the Ulysses.
The Interplay/Taldren games Starfleet Command I, Starfleet Command II and its expansion, Orion Pirates all based the Federation "new light cruiser" hulls on the Miranda-class.
In Cryptic Studios' MMORPG Star Trek Online, one of the first ships a Federation character receives is a Miranda class.
In the reference work Ships of the Line, on pages 132-133, there was information about a USS Leonov. This starship was attacked near the planet Epsilon Draconis III by the Dominion. Suffering major damage, especially to the port nacelle, the captain ordered the crew to abandon the ship, and the crew fled the ship in escape pods. These pods landed on Epsilon Draconis III, a Dominion-controlled planet.

External link

Template:NCwiki

@@ Line 8: / Line 8: @@
 |Active      = [[23rd century]] - [[24th century]]
 |Crew        = Approx. 26-35 (24th century)
+|Mass        = 655,000 metric tons
 |Armament    = [[Phaser]]s, [[photon torpedo]]es
 |Defenses    = [[Deflector shield]]s
@@ Line 22: / Line 23: @@
 Some ''Miranda''-class starships constructed during the first half of the 24th century fell under the authority of the [[Yoyodyne Division]], around stardate 22519.5. Vessels including {{USS|Brattain}} were constructed at this time at [[40 Eridani A Starfleet Construction Yards]]. ({{TNG|Night Terrors}} ''[[dedication plaque]]'')
-The mission profile of the ''Miranda''-class varied from performing various [[science vessel|scientific roles]] to conducting [[patrol ship|patrol duties]]. ({{film|2}}; {{TNG|Night Terrors}}; {{film|4}}; {{DS9|In the Cards}}) By the latter half of the 24th century, one variation of this class was known by the designation of '''Class 6''' [[Federation]] [[supply ship]]. ({{TNG|Unnatural Selection}})
+The mission profile of the ''Miranda''-class varied from performing various [[science vessel|scientific roles]] to conducting [[patrol ship|patrol duties]]. ({{film|2}}; {{TNG|Night Terrors}}; {{film|4}}; {{DS9|In the Cards}})
+By the latter half of the 24th century, one variation of this class, {{USS|Lantree}}, was known by the designation of Class 6 [[Federation]] [[supply ship]]. ({{TNG|Unnatural Selection}})
-The ''Miranda''-class was present in several major Federation engagements against the [[Borg]], including the [[Battle of Wolf 359]] and the [[Battle of Sector 001]]. ({{DS9|Emissary}}; {{film|8}}) They were also present in numerous [[Dominion War]] battles, where they often served as [[escort]]s. Many ships of the class saw action during [[Operation Return]], the [[First Battle of Chin'toka|First]] and [[Second Battle of Chin'toka|Second]] Battles of [[Chin'toka]], and the [[Battle of Cardassia]]. Many ''Miranda''-class vessels were stationed near [[Deep Space 9]]. ({{DS9|Sacrifice of Angels|Tears of the Prophets|The Changing Face of Evil|What You Leave Behind}}, etc.)
+The ''Miranda''-class was present in several major Federation engagements against the [[Borg]], including the [[Battle of Wolf 359]] and the [[Battle of Sector 001]]. ({{DS9|Emissary}}; {{film|8}})
+They were also present in numerous [[Dominion War]] battles, where they often served as [[escort]]s. Many ships of the class saw action during [[Operation Return]], the [[First Battle of Chin'toka|First]] and [[Second Battle of Chin'toka|Second]] Battles of [[Chin'toka]], and the [[Battle of Cardassia]]. Many ''Miranda''-class vessels were stationed near [[Deep Space 9]]. ({{DS9|Sacrifice of Angels|Tears of the Prophets|The Changing Face of Evil|What You Leave Behind}}, etc.)
 ''Miranda''-class starship were also shown as [[model]]s on several occasions such as in [[Deep Space 9]]'s [[classroom]]. ({{DS9|The Nagus}})
@@ Line 31: / Line 36: @@
 === Physical arrangement ===
 [[File:USS Brattain MSD.jpg|thumb|150px|The [[master systems display]] schematics]]
-The configuration of the ''Miranda''-class shared a similar design lineage and features with the [[refit]] {{ShipClass|Constitution}} implemented in the early [[2270s]]. ({{film|1}})
+The configuration of the ''Miranda''-class shared a similar design lineage and features with the [[refit]] {{class|Constitution}} implemented in the early [[2270s]]. ({{film|1}}) The design also closely resembled the {{class|Soyuz}} starships that were also in service around the same time. ({{TNG|Cause and Effect}})
 The ''Miranda''-class was composed of a single [[primary hull]], consisting of a saucer that was similar to that of the ''Constitution''-class; however, the [[bridge module]], positioned on top in the center, was shaped differently than the ''Constitution''-class module.
@@ Line 39: / Line 44: @@
 [[File:USS Trial.jpg|thumb|150px|Forward docking port]]
-Design features of the primary hull included a [[docking port]] located on the forward section of the ship; the aft section included two [[shuttlebay]]s, separated by the vessel's [[impulse engine]]s.  These shuttlebays were visually numbered; "1" being on the rear-port side, and "2" on the rear-starboard side. ({{film|2}}; {{DS9|The Way of the Warrior}}, etc.)
+Design features of the primary hull included a [[docking port]] located on the forward section of the ship; the aft section included two [[shuttlebay]]s, separated by the vessel's [[impulse engine]]s. These shuttlebays were visually numbered; "1" being on the rear-port side, and "2" on the rear-starboard side. ({{film|2}}; {{DS9|The Way of the Warrior}}, etc.)
-====Refits====
+====Configurations====
-The ''Miranda''-class could be [[refit|fitted differently]] depending on the mission. There were four different known configurations utilized with the ''Miranda'' during its time in service.
+There were five different known hull configurations utilized with the ''Miranda''-class during its time in service.
-The predominant ''Miranda''-class design included a superstructure (or "roll bar") fitted immediately above the primary hull, as a dorsal extension of the ventral nacelle pylons. This superstructure was equipped with [[torpedo launcher]]s and [[phaser bank]]s. ({{film|2}}, etc.) By late [[2373]], this predominant design would undergo an upgrade to its [[warp nacelle]]s. ({{DS9|Sacrifice of Angels}})
+The predominant ''Miranda''-class design included a superstructure (or "roll bar") immediately above the primary hull, as a dorsal extension of the ventral nacelle pylons. This superstructure was equipped with [[torpedo launcher]]s and [[phaser bank]]s. ({{film|2}}, etc.) Some configurations lacked the "roll bar" superstructure, and in other cases, included two large sensor pods affixed on the port and starboard sides of the primary hull. In other configurations there was a single pod module. ({{TNG|Unnatural Selection}}; {{DS9|Emissary|Favor the Bold}})
-{{bginfo|The reconfigured nacelle coloration, which replaced the black with a blue glow as well as made the semi-circle at the front of the nacelle yellow, came as a result of the transition from [[studio model]] to [[CGI model]]. In addition, a small number of the CGI ships included an additional red glow placed where the rear torpedo launcher was located that matched that of the impulse engines.}}
+By late [[2373]], ''Miranda''-class ships using the predominant design had undergone upgrades to their [[warp nacelle]]s and in some cases to impulse engine systems. ({{DS9|Sacrifice of Angels}})
-Some refits lacked the addition of a superstructure, and in other cases, included two large pods affixed on the port and starboard sides of the primary hull. ({{TNG|Unnatural Selection}}; {{DS9|Emissary}})
+{{bginfo|The new post-2373 ''Miranda''-class ships came as a result of the transition from [[studio model]] to [[CGI model]]s. The new design featured glowing nacelles in some cases as well as made the semi-circle at the front of the nacelle yellow. In addition, some of the CGI ships included an additional red impulse engine glow where the rear torpedo launcher had normally been located.}}
 <gallery>
-File:USS Reliant, dorsal.jpg|Configuration with "rollbar" superstructure.
+File:USS Reliant, dorsal.jpg|Configuration with "roll bar" superstructure
-File:Miranda class upgrade, dorsal_aft.jpg|Configuration with "rollbar" and upgraded nacelles.
+File:Miranda class upgrade, dorsal_aft.jpg|Configuration with a "roll bar" impulse engine and upgraded nacelles
-File:USS Lantree.jpg|Configuration without "rollbar" superstructure.
+File:USS Lantree.jpg|Configuration without "roll bar" superstructure
-File:USS Saratoga aft, Emissary.jpg|Configuration without "rollbar" superstructure with port and starboard sensor pods.
+File:USS Saratoga aft, Emissary.jpg|Configuration without "roll bar" superstructure with port and starboard sensor pods
+File:Miranda class Antares-type variant.jpg|Configuration [[:File:USS Antares kit-bash model as built by Adam Buckner.jpg|with a pod module]]
 </gallery>
-An additional refit of the ''Miranda''-class was also created and configured with much more significant modifications. This design, known as the {{ShipClass|Soyuz}}, was retired during the [[2280s]]. ({{TNG|Cause and Effect}})
 ===Tactical systems===
-Standard to all designs were six dual [[phaser bank]]s located on the primary hull &ndash; three mounted to the top and three mounted on the bottom of the saucer.
+Standard to all designs were six dual [[phaser bank]]s located on the primary hull &ndash; three mounted to the top and three mounted on the bottom of the saucer.  Also standard to all designs were two single phaser emitters mounted just beneath the impulse engines.
 In those ships possessing the "roll bar," that superstructure contained two tubular [[phaser emitter]]s on each side that could fire both forward and to the ship's flanks. There were also two forward and two aft [[photon torpedo launcher]]s housed in a pod mounted in the center of the superstructure. ({{film|2}}, {{film|8}})
-{{bginfo|The configuration of the torpedo launcher cowling was somewhat similar in appearance to the cowling used for the torpedo launchers on ''Constitution''-class vessels.}}
+{{bginfo|While the two aft-phasers were never seen used in any film or episode, they are visible on the model. [http://hlmweb.de/sf-raumschiffe/dieRaumschiffe/ST_108.jpg] The configuration of the torpedo launcher cowling was somewhat similar in appearance to the cowling used for the torpedo launchers on ''Constitution''-class vessels.}}
 <gallery>
@@ Line 70: / Line 75: @@
 </gallery>
-By the 24th century a number of modifications were made to the ''Miranda''-class weapons systems.  Some ''Miranda''-class vessels, such as those of the "twin-pod" variant, included an upgraded phaser array mounted on the lower part of the ventral dome and photon torpedo launchers in the main part of the ship rather than in a pod on the "roll-bar". ({{DS9|Emissary}})
+By the 24th century a number of modifications were made to the ''Miranda''-class weapons systems.  Some ''Miranda''-class vessels, such as those of the "twin-pod" variant, included a phaser array mounted on the lower part of the ventral dome and photon torpedo launchers in the main part of the ship rather than in a pod on the "roll-bar". ({{DS9|Emissary}})
 {{bginfo|In "Emissary", the [[USS Saratoga (NCC-31911) personnel#Captain|Captain of the ''Saratoga'']] gave an order to "load [[torpedo bay]]s" (which is also mentioned visually in the script), though the ship was never seen firing any torpedoes at all.}}
@@ Line 96: / Line 101: @@
 File:USS Reliant bridge.jpg|Main bridge, {{USS|Reliant}}
 File:USS Reliant viewscreen.jpg|[[Viewscreen]], USS ''Reliant''
-File:USS Saratoga bridge, TVH.jpg|Main bridge, {{USS|Saratoga|NCC-1887| (NCC-1887)}}
+File:USS Saratoga bridge, TVH.jpg|Main bridge, {{USS|Saratoga|NCC-1887}}
 </gallery>
@@ Line 108: / Line 113: @@
 <gallery>
 File:Uss lantree bridge.jpg|Main bridge, {{USS|Lantree}}
-File:USS Saratoga bridge, Emissary.jpg|Main bridge,  {{USS|Saratoga|NCC-31911| (NCC-31911)}}
+File:USS Saratoga bridge, Emissary.jpg|Main bridge,  {{USS|Saratoga|NCC-31911}}
 File:Uss brattain bridge.jpg|Main bridge, {{USS|Brattain}}
-File:USS Saratoga viewscreen.jpg|Viewscreen, USS ''Saratoga'' (NCC-31911)
+File:USS Saratoga viewscreen.jpg|Viewscreen, USS ''Saratoga''
 </gallery>
@@ Line 138: / Line 143: @@
 === Shuttlebay ===
 [[File:USS Saratoga, shuttlebay.jpg|thumb|150px|''Miranda''-class shuttle bay interior]]
-The ''Miranda''-class features two shuttlebays, located port and starboard of the ship's center. On some ''Miranda''-class ships, such as the USS ''Saratoga'', both of the shuttlebays hold [[Miranda class escape pod|escape pods]] capable of transporting several personnel. ({{DS9|Emissary}})
+The ''Miranda''-class features two shuttlebays, located port and starboard of the ship's center. On some ''Miranda''-class ships, such as the USS ''Saratoga'', both of the shuttlebays hold [[Miranda type escape pod|escape pods]] capable of transporting several personnel. ({{DS9|Emissary}})
 {{clear}}
@@ Line 148: / Line 153: @@
 == Ships commissioned ==
 ;Named:
+*{{USS|Antares|NCC-9844}} (NCC-9844)
 *{{USS|Brattain}} (NCC-21166)
 *{{USS|Lantree}} (NCC-1837)
@@ Line 156: / Line 162: @@
 *{{USS|Saratoga|NCC-31911}} (NCC-31911)
 *{{USS|ShirKahr}} (NCC-31905)
-*{{USS|Sitak}} (NCC-32591)
+*{{USS|Sitak}}
 *{{USS|Tian An Men}} (NCC-21832)
 *{{USS|Trial}} (NCC-1948)
@@ Line 166: / Line 172: @@
 === Appearances ===
 <div class="appear">
-*[[Star Trek films|''Star Trek'' films]]:
+*{{Star Trek films}}:
 ** {{film|2}}
 ** {{film|4}}
@@ Line 202: / Line 208: @@
 </div>
-=== Background ===
+=== Background information ===
 ==== Name ====
 The name ''Miranda''-class was not mentioned in dialog on-screen, but was devised by the art department of TNG to refer to this design. The name was used on several pieces of on-screen signage referring to these vessels, and is also used by dedicated references such as the ''[[Star Trek Encyclopedia]]''.
@@ Line 211: / Line 217: @@
 ==== Specifications ====
-The specifications for the ''Miranda'' were not mentioned in dialog, but are referenced from the show's art department. The initial length for the ''Miranda''-class of 765' (233m) was established during the production of ''Star Trek II'', that was later followed up by [[Andrew Probert]] during [[TNG Season 1]]. The exact length, based on the universally accepted length of the refit {{ShipClass|Constitution}}, at least behind-the-scenes, at 1000 feet and assuming that both classes employ standardized ship components like nacelles and saucers-sections, is 234.9 m (770.67ft).  The scale of the CGI mesh was scaled approximately twenty-five percent smaller than had been previously established. According to a 20 January 1998 post in the newsgroup alt.tv.star-trek.ds9 by David Stipes, a length of approximately 500' to 560' (167m to 187m) was used when he blocked shots in DS9. [http://groups.google.com/group/alt.tv.star-trek.ds9/msg/f3804ef9a7be443a?hl=en]
+The specifications for the ''Miranda'' were not mentioned in dialog, but are referenced from the show's art department. The initial length for the ''Miranda''-class of 765' (233m) was established during the production of ''Star Trek II'', that was later followed up by [[Andrew Probert]] during [[TNG Season 1]]. The exact length, based on the universally accepted length of the refit {{class|Constitution}}, at least behind-the-scenes, at 1000 feet and assuming that both classes employ standardized ship components like nacelles and saucers-sections, is 234.9 m (770.67ft).  The scale of the CGI mesh was scaled approximately twenty-five percent smaller than had been previously established. According to a 20 January 1998 post in the newsgroup alt.tv.star-trek.ds9 by David Stipes, a length of approximately 500' to 560' (167m to 187m) was used when he blocked shots in DS9. [http://groups.google.com/group/alt.tv.star-trek.ds9/msg/f3804ef9a7be443a?hl=en]
 ==== Studio model ====
+:'''See''' [[Miranda class model|''Miranda''-class model]].
-In the earliest scripts of {{film|2}} the {{USS|Reliant}} was supposed to be a {{ShipClass|Constitution}}. However, the cumbersomeness of the ''TMP''-[[studio model]] (vehemently expressed by director of photography [[Kenneth Ralston]] at the time) was part of the reasons why the class of the ''Reliant'' was redesigned from a ''Constitution''-class to the ''Miranda''-class, the other reason being that the producers were afraid that audiences would not be able to tell the two ships apart during the battle sequences. "''In the dogfight you had to instantly recognize which ship you were looking at, so they had to look different. At the same time, you had to make them look like they came from the same culture and had the same technology''", [[Joe Jennings]] elaborated.(''[[Star Trek: The Magazine Volume 3, Issue 3]]'', page 69)
-===== Design =====
-[[File:Reliant original design sketches.jpg|thumb|150px|The original designs as sent to [[Harve Bennett]]]]
-The script called for an older cruiser of "[[USS Enterprise (NCC-1701)|''Enterprise'']]'s own class" but of a "different configuration." This ended up being a different class of starship in its own right, the first distinct Federation starship design other than the NCC-1701 to ''ever'' appear in a filmed, live-action ''Star Trek'' production. What was to become the ''Miranda''-class [[studio model]], specifically the USS ''Reliant'', was designed at [[Paramount Pictures|Paramount]] by Joe Jennings, [[Mike Minor]] and [[Lee Cole]]. On the design Jennings noted,"''It was the first time a new spaceship had been designed since the Klingon battle cruiser. That was a lot of fun. She was supposed to be a coastal and geodetic survey ship, like a buoy tender. She would be armed perhaps, but only lightly; she wasn't a lion ship like the ''Enterprise''. Also, remember, the ''Enterprise'' was supposed to be an exploratory vessel, where the armament was secondary. That was even more true for the ''Reliant''; she was supposed to just stick around in the known universe and take care of things that everybody already knew about.(...)It was fun to try to make it look identifiable different; we had long postulated that the circular saucer said "This is Starfleet Navy," and it uses engines that looked pretty much like those on the ''Enterprise''.''"(''[[Star Trek: The Magazine Volume 3, Issue 3]]'', page 69-70)
-The ''Miranda''-class model was originally designed "upside-down", with the nacelles above the dish and the "roll-bar" below the dish. However, when the initial drawing was sent to [[Harve Bennett]] for approval, he viewed the drawings upside down. He liked the design and signed off on it. The FX team debated whether or not to send the sketches back to Bennett (who was in Israel at the time working on another project) with the correct orientation, but they decided that there was insufficient time to do so and decided to add a "rollbar" to balance out the suddenly dropped nacelles.
-=====Large studio model=====
-The studio model was constructed at [[Industrial Light & Magic]] (ILM) under supervising model maker [[Steve Gawley]]. Among Gawley's crew were model makers [[Bill George]], [[Sean Casey]], [[Larry Tan]], [[Jeff Mann]], [[Steve Sanders]], [[Brian Chin]], [[Bob Diepenbrock]], and [[Mike Fulmer]], with [[Martin Brenneis]] responsible for model electronics.
-In constructing the model, ILM took much consideration in creating a model that could be light enough to be easily manouvered during photography. This approach was taken because they did not want to create another bulky model, like the ''Enterprise'' built for {{film|1}}. As a result, the ''Reliant'' model was made at scale three-quarters that of the ''Enterprise''. In addition, the hull for the ''Reliant'' was shaped from vacuum-formed plastic, resulting in a model that was light enough that two people could handle it. The model's interior wiring was also much simpler than was used in the ''Enterprise'' model, limited only to what was required of it as written in the script. The interior contained a metal armature that allowed it to be mounted in various positions as required for filming. The roll bar was a removable piece. A heavily modified duplicate was constructed to showcase the battle damage for later scenes in the movie.
-<gallery perrow=3>
-File:USS Reliant ILM team.jpg|ILM team with completed ''Reliant'' miniature
-File:Battle damaged Miranda class rollbar.jpg|Battle damaged roll bar
-File:USS Reliant enlarged sections.jpg|Enlarged roll bar and destroyed port nacelle of the {{USS|Reliant}}.
-File:USS Reliant enlarged sections(2).jpg|Enlarged aft deck section of the {{USS|Reliant}}
-File:Miranda Class studio model dressed as USS Lantree.jpg|Dressed as the {{USS|Lantree}}
-File:Miranda Class Studio Model at Cristie's.jpg|[[Studio model]] at auction
-</gallery>
-Enlarged pieces were constructed for close-up shots, notably the roll bar. Explosive charges and pre-packed pieces of plastic scrap were packed into the casts to give the illusion of an exploding ship. The exploded model was formed from wax to allow the pieces to be re-molded for additional shots. (''[[The Making of Star Trek II: The Wrath of Khan]]'') Other pieces that were constructed in a similar fashion were a port nacelle and a section of the aft deck were the impulse deflector crystal was located (These pieces are featured in the ''Inside the Star Trek Archives'' special of [[TNG Season 2 DVD]]).
-The high quality large scale studio model continued to be reused for over fifteen years by the producers of TNG and DS9 to represent a variety of different starships and classes, following modifications used in creating the {{USS|Saratoga|NCC-1887| NCC-1887}}, {{USS|Lantree}}, the {{USS|Brattain}} , the {{USS|Bozeman}} and the {{USS|Saratoga|NCC-31911| NCC-31911}}.  After {{e|Emissary}}, the model was put back together in its original configuration and used one last time in {{film|7}} without having its ''Brattain'' markings on the roll bar and its ''Saratoga''-markings on the saucer changed, as an unnamed ship.
-This model was sold as {{stala|1778-0985|Lot #985}} on 7 October 2006, "USS RELIANT MODEL", estimated at $7,000-$9,000: A large 63x37 inch model, labeled as both the USS ''Saratoga'' (on the main body) and USS ''Brattain'' (on the "roll bar"). Auction price: $50,000 US ($60,000 US with premium). The winner eventually sought out [[Ed Miarecki]]'s help in restoring the model in a pristine condition.[http://www.edmiarecki.com/star-trek-tng/uss-reliant/]
-=====Small studio models=====
-{| style="float:right;"
-|<gallery>
-File:USS_Reliant_ILM_small_studiomodel.jpg|[[Industrial Light & Magic|ILM]]'s small [[studio model]]
-File:Destroying the Saratoga.jpg|Preparing a [[Studio_model#Break-Away_model|break-away model]] of the {{USS|Saratoga|NCC-31911}} for destruction
-</gallery>
-|}
-Apart from the high quality large scale model the same ILM-team also built a smaller battle damaged version for forced perspective shots in the movie (the second encounter with the ''Enterprise'' in the [[Mutara Nebula]]). Built partly from an [[AMT/Ertl]] ''Enterprise'' [[Star Trek model kits|model kit]] S970 and custom made vacuum-formed pieces, it was the only time that this model was used for filming purposes.
-This model was eventually sold as {{stala|1778-0984|Lot #984}} on 7 October 2006,"SMALL BATTLE-DAMAGED U.S.S. RELIANT MINATURE MODEL", estimated at $6,000-$8,000: A small 17x10x4 inch model of the ''Reliant'', built for ''Star Trek II'' by ILM, that came with a studio blueprint depicting the early concept for ''Reliant'' in its original "upside down" configuration. Auction price: $24,000 ($28,800 with premium). The winner, a man from London is featured in [[The History Channel]]'s documentary ''[[Star Trek: Beyond the Final Frontier]]''.
-Three so-called [[Studio_models#Break-Away_model|break-away models]] of the class, cast from the molds taken off the studio model, representing the {{USS|Saratoga|NCC-31911}} were built for the DS9 premiere "Emissary". All three of them were blown up to represent the destruction of the ''Saratoga''. (''[[Movie Magic (TV series)|Movie Magic]] Season 1, Episode 11: Models and Miniatures: A Model of Perfection'')
-[[File:USS Trial.jpg|thumb|left|150px|{{USS|Trial}} docking at [[Deep Space 9]]]]
-Another physical model was constructed representing the {{USS|Trial}} appearing in {{e|The Way of the Warrior}} This was a modified [[AMT/Ertl]] [[Star_Trek_model_kits|model kit]] No. 8766 of the USS ''Reliant''. The origin of the name is a result of the rearrangement of the letters R-E-L-I-A-N-T to get T-R-I-A-L (minus the E-N). The registry was also conceived the same way, rearranging 1-8-6-4 to get 1-9-4-8.[http://www.flickr.com/photos/22597000@N07/3530829368/] Additional model kits were used for the closing fleet shots in {{e|Call to Arms}}, footage of which, shot for that episode, would be used for consecutive episodes as stock footage.[http://groups.google.nl/group/rec.arts.startrek.tech/msg/b7b8c22921513d79]
-Yet another AMT model was slated to make an appearance, along with other models of varying starship classes, as one of the golden [[model]]s in the display cases in the [[observation lounge]] of the {{USS|Enterprise|NCC-1701-E|-E}} in {{film|10}}. [[John Eaves]] built the model, filled it with resin, had it gold plated at ArtCraft Plating, but failed to deliver the model in time for shooting and it was subsequently never used. Eaves retained the model, "''I got the other ships done in about a week and took them to the stage and he [''[[John Dwyer]]''] had already filled the cases twice with doubles of the original 6. It was too much work to take out and replace the dups with the new so they didn’t make it on the big screen, but they did wind up at my house again."'', Eaves recalled.[http://johneaves.wordpress.com/2009/06/26/more-of-the-golden-starships/]
-[[File:Starfleet Headquarters studio model with mounted Micro Machines models.jpg|thumb|[[Starfleet Headquarters]] model with a ''Miranda''-class vessel 2nd from the right.]]
-Another commercial product was used as one of the four models mounted in front of the sail shaped top half facade of [[Starfleet Headquarters]] on the [[Presidio]], appearing in {{DS9|Homefront|Paradise Lost}}. The top half of the facade was itself a studio model and the starship models were [[Galoob|Galoob Micro Machines]] (most likely taken from the pewter painted "Star Trek Television Series I Box Set" and "Star Trek the Movies Collectors Edition"). (''[[Star Trek: The Magazine Volume 1, Issue 13]]'', p. 112) A ''Miranda''-class vessels was mounted 2nd from the right.
-=====CGI model=====
-Even as the original models were worn out, a new [[CGI]] model was created. A low resolution CGI-model, built at ILM by [[Larry Tan]] and [[Paul Theren]], made its first appearance as a deep background model in {{film|8}}. According to DS9 Visual Effects Coordinator [[David Stipes]], the ''Miranda''-class ships appearing in the later seasons of [[DS9]] and [[VOY]] were modelled, surfaced, and animated by [[Digital Muse]] [http://groups.google.nl/group/rec.arts.startrek.tech/browse_thread/thread/fce08c32a3bbc1f6/171121363d0cabea], debuting in {{DS9|Favor the Bold}}. Since ILM was requested by [[Paramount Pictures]] to hand over their CGI-models of the {{ShipClass|Norway}}, {{ShipClass|Saber}}, {{ShipClass|Akira}} and {{ShipClass|Steamrunner}}, also featured in ''First Contact'', for remodeling and remapping for the earlier episode {{e|Call to Arms}}, it stands to reason that Stipes referred to the CGI-model of the ''Miranda''-class ILM built, something Muse's supervisor [[Bruce Branit]] more or less confirmed ([[Cinefantastique]], Vol.30, No.9/10, page 64). But like the others it was built at a fairly low resolution and had to be partially rebuilt and remapped.
-=====Legacy=====
-Several ''Miranda''-class related items were sold in various auctions, including:
-* A Christie's [[40 Years of Star Trek: The Collection]] auction {{stala|1778-0726|Lot #726}}, "STARSHIP RELIANT MODEL BLUEPRINTS AND STAR TREK II: THE WRATH OF KHAN DEVELOPMENT DOCUMENTS", estimate $800-$1,200: Which included a collection of blueprints used in developing the Starship Reliant miniature for ''Star Trek II''. Auction price: $4,000 US ($4,800 US with premium), sold on 7 October 2006.
-* A [[It's A Wrap! sale and auction]] which was described as "BRONZED STARSHIP MODEL". This ''Miranda''-class derived model had four nacelles, with the standard nacelles under the ship along with two others attached to the roll-bar above the other nacelles. This configuration was never shown on screen. Final auction price: $232.50 US. {{stala|0191}}
-* A [[It's A Wrap! sale and auction]] where an unsold foam core [[studio model|camera test model]] was also listed.{{stala|10353}}
-For the {{y|2008}} remastering of {{TOS|The Ultimate Computer}}, the production crew of [[David Rossi]], [[Denise Okuda]] and [[Mike Okuda]] briefly considered using alternate ship types to represent the fleet that engaged the [[M-5 computer]]. According to M. Okuda, "''one of the ideas we considered was to have a Reliant-type configuration for a couple of the guest ships. The problem with a smaller ship is that you don't want the sense that the ''Enterprise'' is more powerful, because that would hurt the drama of the story. Ultimately, keeping all four ships the same emphasizes that the only variable is that the ''Enterprise'' is piloted by the M-5 computer.''" Another factor in maintaining the integrity of the original designs, according to D. Okuda, was that "''we all decided that it was best to honor the expectations of fans who had grown up seeing four ''Constitution''-class ships.''" [http://www.trekunited.com/news/content/view/800/80/]
 ==== Technical Manual ====
@@ Line 279: / Line 230: @@
 * Power Plant: One 1500 plus Cochrane warp core feeding two nacelles; one impulse system.
 * Dimensions: Length, 277.76 meters; beam, 173.98 meters; height: 65.23 meters.
-* Mass: 655,000 metric tonnes.
+* Mass: 655,000 metric tons.
 * Performance: Warp 9.2 for 12 hours.
 * Armament: Six type-7 phaser emitters; two pulse phaser cannons; two photon torpedo launchers.
@@ Line 289: / Line 240: @@
 * The [[Interplay]] PC Game ''[[Star Trek: Starfleet Academy (game)|Starfleet Academy]]'' features several ''Miranda''-class vessels including USS ''Oberon'' (NCC-1806), USS ''Rutherford'' (NCC-1835), USS ''Alexandria'' (NCC-1842), USS ''Tempest'' (NCC-1852), USS ''Atlantis'' (NCC-1865), and USS ''Demeter'' (NCC-1868).
 * The Interplay PC Game ''[[Star Trek: New Worlds|New Worlds]]'' features the ''Miranda''-class vessel USS ''Ranger'' (NCC-1975).
-* The [[Activision]] PC Game ''[[Star Trek: Deep Space Nine - The Fallen|The Fallen]]'' features the ''Miranda''-class vessel USS ''Ulysses'' (NCC-10767).
+* The [[Activision]] PC Game ''[[Star Trek: Deep Space Nine - The Fallen|The Fallen]]'' features the ''Miranda''-class vessel USS ''Ulysses'' (NCC-10767). Several levels feature Sisko and Worf exploring the wreckage of the ''Ulysses''.
-* The Interplay/[[Taldren]] games ''[[Star Trek: Starfleet Command|Starfleet Command I]], [[Star Trek: Starfleet Command II: Empires at War|Starfleet Command II]]'' and its expansion, ''[[Star Trek: Starfleet Command - Orion Pirates|Orion Pirates]]'' all based the Federation [[light cruiser]] hulls on the ''Miranda''-class.
+* The Interplay/[[Taldren]] games ''[[Star Trek: Starfleet Command|Starfleet Command I]], [[Star Trek: Starfleet Command II: Empires at War|Starfleet Command II]]'' and its expansion, ''[[Star Trek: Starfleet Command - Orion Pirates|Orion Pirates]]'' all based the Federation "new [[light cruiser]]" hulls on the ''Miranda''-class.
 * In [[Cryptic Studios]]' MMORPG ''[[Star Trek Online]]'', one of the first ships a Federation character receives is a ''Miranda'' class.
+* In the reference work ''[[Ships of the Line]]'', on pages 132-133, there was information about a USS ''Leonov''. This starship was attacked near the planet Epsilon Draconis III by the [[Dominion]]. Suffering major damage, especially to the port nacelle, the captain ordered the crew to abandon the ship, and the crew fled the ship in [[escape pod]]s. These pods landed on Epsilon Draconis III, a Dominion-controlled planet.
-== External link ==
+=== External link ===
-* {{NCwiki|Miranda class}}
+* {{NCwiki|Miranda class|''Miranda'' class}}
 [[pt-br:Classe Miranda]]
 [[de:Miranda-Klasse]]
 [[es:Clase Miranda]]