Wikia

Memory Alpha

Exocomp

Discuss20
37,544pages on
this wiki
Revision as of 22:52, December 4, 2013 by 70.143.79.92 (Talk)

Exocomp with tool

An exocomp with a mode stabilizer

Exocomps were artificial lifeforms designed by the Tyran Doctor Farallon that had gained sentience.

Origins

Farallon began working on an exocomp prototype several years prior to 2369 when she had three working units in operation at the Particle Fountain Project for maintenance purposes. The exocomp was not intended to be sentient, but due to the adaptive nature of its design it evolved, gaining sentience.

The basis of the exocomp was an industrial servo mechanism which had been in common use on Tyrus VIIa for many years. This basic design was extended by Dr. Farallon who named them 'exocomps'. The main design goal was to make the exocomp a problem-solver.

Design

Exocomp topview

Inside an exocomp

The exocomp consisted of a micro-replicator, a boridium power converter and axionic chip network. This axionic network gave the exocomp formidable computational power. The micro-replicator not only created tools which the exocomp could use to solve problems but also created new circuit pathways in the exocomps memory when it performed new tasks. This mechanism gave the exocomp the ability to learn. The more tasks it had to perform, the more pathways were formed in its memory.

Problems to be solved could be entered through a command-pad, after which the exocomp decided what kind of tool it had to use and then replicated that tool.

Recognition of sentience

Lieutenant Commander Data was testing an exocomp on the particle fountain and had completed nineteen separate tests when the device was sent into an access tunnel to seal a plasma conduit. The exocomp returned without finishing its task. When Dr. Farallon tried to send it back into the access tunnel by overriding the exocomp's commands, her control pad overloaded. A few seconds later the plasma conduit exploded. If the exocomp had returned to the access tunnel, it would have been destroyed.

Exocomp pathways

An exocomp's circuit pathways

When Data brought the exocomp back to the USS Enterprise-D for analysis, it was found that the exocomp had shut down and that the interface circuitry which connected the exocomp to the control pad was completely burned out. Further investigation revealed that the number of new circuit pathways had increased by 632 percent. Dr. Farallon explained that sometimes an exocomp randomly generated large numbers of new pathways, which ultimately led to a total shutdown. When this happened the exocomp became totally useless and had to be erased and reprogrammed all over again. Data mentioned that the new pathways did not to appear to interfere with the original circuitry. This led Lieutenant Commander La Forge to comment that somehow the exocomp knew that the conduit would explode and therefore it had to leave the access tunnel. Because this remark would imply some form of self-preservation, Data took it upon himself to perform a level one diagnostic on the exocomp.

The diagnostic Data performed revealed that the command module was working normally. When checking the exocomp's sensor logs it turned out that the exocomp had burned out its own command interface circuitry, and then ran a self-repair program on the same circuitry two hours later. In a short briefing it was decided to test whether the exocomp possessed a survival instinct or not.

Exocomp test

An exocomp being tested

A test was created where an exocomp had to repair a small conduit breach in a Jefferies tube in which a plasma cascade failure was simulated by means of a transient overload signal. The exocomp performed the repair and was returned after the plasma overload simulation would have destroyed it. Data performed thirty-four additional tests and all tests had the same outcome. Every single time the exocomp would complete the repairs. Because Doctor Crusher distracted Data from his latest test, the exocomp returned automatically and Data noticed it had a different tool than when it entered the tube. In the previous tests the exocomp was recalled when the simulated plasma overload would have occurred. When Data checked the sensor logs he discovered that the exocomp had deactivated the overload signal. It had not failed the test; it had seen right through it.

When the situation on the particle fountain went critical the decision was made to reconfigure the exocomps so their power cells would explode when beamed into the particle matter stream, but because of their survival instincts their command pathways would have to be disconnected. Data locked out the transporter controls preventing the exocomps from being transported because he did not believe that it was justified to sacrifice one lifeform for another. Commander Riker proposed to ask the exocomps if they were willing to perform this mission. When their command pathways were reconnected they reprogrammed the commands Data had entered and altered the transporter coordinates to send them inside the station core, instead of into the matter stream. They solved the problem by distorting the particle stream frequency. Unfortunately, one of the exocomps did not survive, as it had to stay behind to disrupt the particle stream so the other two could safely be beamed back to the Enterprise.

At last report, Dr. Farallon was trying to find out what the exocomps really were without treating them as simple tools. (TNG: "The Quality of Life")

Appendices

Background information

Exocomp prop

An exocomp prop

In early drafts of "The Quality of Life", exocomps were known as "metacomps" but the name was changed when the staff discovered a company with the same name existed. (Star Trek: The Next Generation Companion 3rd ed. p. 227)

The exocomps were originally intended to be simple wall terminals and household appliances. Writer Naren Shankar envisioned them as a modular device that would be added to existing tools, "like a high-tech Transformer toy," and above all, would be alien in appearance and easily overlooked. In addition, he hoped that the eventual look of the exocomps would not be the "cute R2-D2 type," referencing the Star Wars films. He further commented, "As long as they're cute and fuzzy people respond, but if it's a nasty, ugly-looking thing they won't save it." (Star Trek: The Next Generation Companion 3rd ed. p. 227)

Senior illustrator and technical consultant Rick Sternbach designed the exocomps, but the episode budget allowed only two to be built. In "The Quality of Life", three exocomps can be seen; the third was digitally inserted in post-production. Their motion was propelled by puppeteer Kevin D. Carlson with control rods who was also "painted out" later. (Star Trek: The Next Generation Companion 3rd ed. p. 227) Sternbach loosely based their design on the character "Nanmo" from the animated series The Dirty Pair. (Star Trek Encyclopedia 3rd ed., p. 144) The first edition of the Star Trek Encyclopedia (p. 96) mistakenly referred to the character of "Mugi".

On the It's A Wrap! sale and auction, lots of this model sold for $2705.55 [1] and $1541.00 [2]. An additional lot of an individual exocomp component sold for $800 ($960 with premium). [3]

In the episode Star Trek: Enterprise "Dead Stop" the exocomp casing was used as a prop to heal Malcolm Reed's leg.

Apocrypha

The exocomps are referenced by Counselor Troi in the Star Trek: Titan novel Synthesis.

In Star Trek Online Exocomps appear to have become at least partially affiliated with Starfleet, the Klingon Defense Forces, and parts of the Romulan military. They can be found as player-owned pets (in combat and non-combat versions), or in the game's Duty Officer system as members of the player's crew. It is unknown if they are still sentient, or if these services are voluntary if they are.

External link

Around Wikia's network

Random Wiki